Use the Shining Case to easily hide your transformer and/or controller with style!
Attach the transformer on the wall or ceiling.
If you want to use our Zigbee controller or an RF controller, simply attach it to the transformer with double-sided tape. You then simply plug them together to connect the two.
Next, you will have to mount the housing and the base plate of your Shining Case over the transformer (and the controller as needed).
Then connect the transformer and the controller, put all cables together and hide them in one side of the Shining Case.
Use the Y-splitter provided to route your LED Strips in both directions.
Connect the Y-splitter with the transformer or controller and place one end each of the Y-splitter to the left and right side of the Shining Case. Now you can easily connect the ends of the LED Strips with the ends of the Y-splitter and stick them onto the base plate.
Close off the Shining Case with the housing and let your LED strips shine!
Should you ever need to lift the cover at a later time, just use a narrow-head screwdriver and push the head gently into the small openings. The cover will then pop off the base plate.
The Shining Case will also look great with our profiles! Try it out for yourself!
