Zigbee 3.0: Plug & Shine smart control

Control the garden lighting system via app, voice command or remote control

Smart control for your Zigbee lighting with the smik Gateway

It can also be used, for example, with a Philips Hue Bridge 2 (excl. entertainment) or
an Amazon Echo with Zigbee interface.

App control

Control your smik light world via smartphone from home or on the move.

Voice control

Adjust your light with simple words via Smart Speaker (Amazon Alexa or Google Assistant) or smartphone.

Classic control options

Use classic control options such as the Gent remote control or the Smart Switch wall switch

Plug & Shine Controller

The Zigbee 3.0 Plug & Shine Controller enables an entire Plug & Shine system to be switched and dimmed smartly. However, it can also be used to make only individual strands of your Plug & Shine installation smart. When using several controllers in a system, the resulting areas can be controlled individually. They can thus be set individually.

Go to Plug & Shine Controller

Smart Luminaires

The use of smart individual luminaires offers maximum flexibility in the setting options. All Zigbee 3.0 luminaires can be individually controlled and their light colour and brightness adjusted. Not only different shades of white, but also coloured light is possible with the use of smart individual luminaires. Favourite settings can be saved and automatically called up using scenes and automation.

To the smart Luminaires

Gent 2

With this Zigbee 3.0 remote control, you can comprehensively control up to 30 lamps or lights in up to four groups. These groups can be controlled individually or in any combination, with the red activation LEDs showing you which groups are currently being addressed.

The remote control gives you complete control over switching on and off, dimming, white light and colour control. It can also be used in conjunction with the Paulmann smik Gateway to enable parallel control with an app or by voice.

Go to Gent 2

Smart Switch Outdoor

The smart Zigbee 3.0 wall switch allows intuitive, direct switching and dimming of products without a smartphone or gateway. Customised configuration can be carried out in combination with the Paulmann smik gateway. Only with the associated Paulmann smik app can group buttons be individually assigned to rooms and scenes. Thanks to IP44 protection, the smart wall switch is splash-proof and can therefore be used outdoors.

Go to Smart Switch Outdoor

Download the app – that's it!

You will find the new Paulmann Smart Home app in your App Store. The app is compatible with iOS (version 13 and higher) and Android (version 8 and higher). The app is installed in just a few minutes on your mobile device.

How to get started with Smart Light control in 3 easy steps:

1. Download the Paulmann Home app from the App Store!
2. Set up the app and activate your luminaires in the app!
3. Use the app to control the luminaires. Done!

iOS Android

Jens M.

„Intuitive and quickly installed"

According to our customer Jens M., the Smik system was installed quickly and the operation was intuitive. Thanks to the wall switch and the Alexa connection, many applications and networks are possible in the home.