Article-No.:
94513
LED Exterior wall luminaire
Smart Home Zigbee 3.0
Padea Dusk sensor
IP44 198x71mm RGBW+ 8,2W 550lm 230V Anthracite Plastic
IP44 198x71mm RGBW+ 8,2W 550lm 230V Anthracite Plastic
- RGBW and Tunable White as outdoor lighting
- With number and letter sets for use as a house number luminaire
- IP44 - protected against water spray, even outdoors
LED Exterior wall luminaire Smart Home Zigbee 3.0 Padea Dusk sensor IP44 198x71mm RGBW+ 8,2W 550lm 230V Anthracite Plastic
The modern and smart Padea exterior wall luminaire can be paired with a house number and brings light to your exterior walls. It helps you find your way after dark and provides increased safety. The Tunable White white light control allows individual, continuous adjustment of the colour temperature. RGBW function offers a free choice of light colour. The colour temperature and light colour can be adjusted via the Zigbee 3.0 function. When it gets dark, the luminaire switches on with the selected light colour and 30% brightness. As soon as someone approaches, the outdoor light is switched to 100% brightness by the built-in motion sensor and then back to the previously set colour and 30% brightness after about 30 seconds. Zigbee 3.0 is a radio transmission protocol that interlinks devices from different manufacturers. Compatible with Smart Home Gateways featuring a Zigbee 3.0 interface
- RGBW and Tunable White as outdoor lighting
- With number and letter sets for use as a house number luminaire
- IP44 - protected against water spray, even outdoors
- The colour temperature is individually and infinitely adjustable with tunable white light control
- RGBW function offers a free choice of light colour
- Suitable for outdoor use
- For attractive lighting accents on exterior walls
- Twilight switch only comes on at a certain level of darkness
| Dimension | |
|---|---|
| Dimensions (Height x Width x Depth) | H: 252 x B: 198 x T: 71 mm |
| Design and Material | |
|---|---|
| stainless | stainless |
| Colour | Anthracite |
| Material | Plastic |
| Installation | |
|---|---|
| can be used with the following dimmers | Paulmann 501.34 Smart Switch, Paulmann SmartHome Zigbee Gent2 501.40 |
| Energy consumption | |
|---|---|
| Energy efficiency (A to G) | E |
| Service life | |
|---|---|
| Lifetime | 30.000 h |
| Light Characteristics | |
|---|---|
| Colour temp. | 3000 K |
| Colour change | Color change RGBW, Tunable White |
| Usable luminous flux | 550 lm |
| Luminous flux LED module | 1000 lm |
| color temp | 3.000 - 6.500 K |
| Lamp Features | |
|---|---|
| Component parts | 8,2 W |
| Compatible Smart Home technology | Zigbee |
| Technique | LED |
| IP protection | IP44 |
| Dim | with Smart Home |
| Dimmable | Yes |
| Inclusive lamp | yes |
| Total Width | 198 mm |
| Number of component parts | 1x |
| protection class | protection class II |
| Radio frequency | 2,4 GHz |
| Radio range | 10 m |
| Replacable | 3 Lightsource is not replaceable, the complete lighting must be replaced.|6 Control gear is not replaceable, the complete lighting must be replaced. |
| Power consumption | 9 W |
| Transformer | |
|---|---|
| apparent power | 11 VA |
| Labelling | |
|---|---|
| WEEE-Reg.-No | DE 39236390 |
