Article-No.:
70974
MaxLED
Sensor
Night PIR
DC 24V max. 144W White
DC 24V max. 144W White
£22.95*
Prices incl. Standard rate VAT
- Incl. adhesive pads for an assembly without drilling
- Simple plug-in system for easy installation
MaxLED Sensor Night PIR DC 24V max. 144W White
The MaxLED Night motion sensor makes getting up in the night much easier. The self-adhesive sensor is simply attached together with a corresponding strip under one side of the bed and an illumination time of between 30 seconds and 10 minutes is set manually. As soon as you leave your bed, illumination is activated by the sensor, enabling you to safely make your way in the room. With its indirect, glare-free light, the bed light will not wake anyone.
- Incl. adhesive pads for an assembly without drilling
- Simple plug-in system for easy installation
| Dimension | |
|---|---|
| Dimensions (Height x Width x Depth) | H: 33 x B: 48 x T: 35 mm |
| Design and Material | |
|---|---|
| Colour | White |
| Material | Plastic |
| Connections | |
|---|---|
| Plug-and-socket connector | Plug-and-socket connector |
| Features | |
|---|---|
| Sensors | Twilight-controlled motion detector (IR) |
| Service life | |
|---|---|
| Lifetime | 30000 h |
| Lamp Features | |
|---|---|
| Technique | Accessories without bulbs |
| Inclusive lamp | no |
| Total Width | 48 mm |
| Maximum wattage range | max. 144 W |
| protection class | protection class III |
| Replacable | 7 not concerned. |
| Labelling | |
|---|---|
| MM symbol | MM symbol |
| WEEE-Reg.-No | DE 39236390 |
