Where is the terminal for connecting the 230V on the Linion Power Channel (item no. 98204)?
The quick-release clamp for the 230V connection is secured with a screw at a distance of 360mm from the edge.
Where on the Linion Power Channel is the terminal for connecting the 230V?
On the Zigbee Power Channel (item no. 98181), the quick-release terminal is located xx cm from the end. On the Power Channel without Zigbee (item no. 98204), the terminal is xx cm from the end.
What material are the light channels in the Linion System made of?
The light channels are made of aluminium and feature a plastic diffuser.
In which colours is the linion light channel system available?
The light channels are available in chrome matt (RAL 9006) and black matt (RAL 9004).
In what lengths are the straight Linion light channels available?
We offer the light channels in lengths of 0.5m, 1m and 1.5m.
In which light colours is the linion light channel system available?
All components of the Linion light channel system are fitted with warm white LEDs (3000K).
Can the linion light channel system be shortened?
No, there are no plans to shorten the light channel.
What is the power supply voltage for the Linion lighting system?
Linion light channels are powered by 24V DC.
When installing the corner piece in the light channel system linion (item nos. 98171/98176), does the direction matter?
With the light channel system linion, the corner can be used in both directions.
What types of connectors are available for the light tunnel system?
Each lighting unit comes complete with the necessary components for connection (stabilising plate, electrical connectors, 2 side connectors).
How big is the light channel system linion?
The channels measure 40 x 40 mm.
What is the diameter of the circle formed by the curved elements (item no. 98172) in the light channel system linion?
The closed circle, consisting of four 90° bends, has a total diameter of 110 cm.
How bright is the linion light channel system?
The light output of the Linion system is 1,000 lumens per metre.
How can the power lead of the Linion Power Box be shortened?
The Linion Power Box’s power cable can be pushed into the box; it is not possible to shorten it by rewiring.
How long can the Linion light channel system be extended?
The maximum system length is 8 metres with the Power Channel Zigbee (item nos. 98181/98182) and up to 5 metres with the Power Channel On/Off (item nos. 98204/98205).
What is the length of the cable suspensions for the linion light channel system?
The suspension arms can be adjusted continuously between 10 and 150 cm.
How are the Linion light channels dimmable?
Using our Zigbee power supplies with Power Channel or Power Box, the brightness of the connected system can be adjusted via a Zigbee 3.0 controller.We recommend our Gent 2 Zigbee remote control (item no. 50140) or the Paulmann Smik Gateway (item no. 50135). Dimming via a light switch on the 230V supply line is not technically possible.
How do you remove the cap from the ballast connection on the Linion Power Box (98178/98179/98206/98207)?
The cap is fitted with a positive fit; the best way to remove it is to pry it upwards using a large screwdriver and a bit of force.
Where can I get the end caps?
The end caps are included with the power supply and can also be ordered from our online shop under item numbers 98625 and 98626 if required.
What are the Linion ‘Straight/Curve Cover’ accessories designed for?
When a system is suspended, the covers can be fitted to the exposed rear panels to protect against dust and enhance the appearance.
